Vergi Coastal Residences – Technical Specifications
Structure: Made of reinforced concrete C37 (Structural design according to the relevant EU Standards and Earthquake code). External columns and beams are a minimum of 25 cm wide.
Brickwork: Hollow clay bricks, 30cm wide on all external walls and 10cm wide internally, according to EU Standards. In addition, 5cm polystyrene applied on all external columns and beams for maximum energy saving purposes. All plastered internally and externally in 3 coats plus 3 coats of paint.
Floors: All tiles used are European Class ‘A’ quality. Verandas and Outdoors patios will be anti-slip tiled.
Fittings: The walls in the bathroom will be tiled up to the height of the ceiling. All tiles used are Class ‘A’ quality. The kitchen wall tiles will be fitted from the kitchen counter worktop up to and in between the cupboards. The bathroom worktops will be made of natural granite stone.
Verandas, Windows and Doors: The windows and the exterior sliding doors are made of silver aluminium, series MU-3200 (sliding) and MU-2000 (opening) with double-glazing and are fitted directly on the walls
Timber: The main entrance door will be made of solid wood. All interior doors will be MDF beech or oak oven-varnished. The interior door frames will be Swedish Class ‘A’ wood.
Sanitary fittings: First quality, made in Europe.
Wardrobes and Kitchen: MDF beech wood or oak oven-varnished with white or wood colour melamine 18mm inside finish. Kitchen worktop will be of natural granite stone and cupboards made of MDF with specialised mechanisms imported from Italy. Dimensions are as shown on the Architectural plans.
Fireplace: Fireplace in the living room area according to architectural plans.
Electrical Installation: All installations according to the appropriate governmental department specifications with provision for double sockets, telephone and television sockets in the living room and all bedrooms. Provision for smart home applications.
Solar Heater: Double panel solar heater (volume 150 litres) with copper pipes and reserve water tank (volume 1200 litres).
Plumbing Installation: German pipes of multi layered aluminium connected to manifold. Separate pipes for washing-machine.
Air conditioning Provision: Pipe installation for air conditioning.
Banisters: As shown on the architectural plans, glass balustrades or painted metal banisters.
Insulation: All verandas and surrounding walls are sheathed with cement reinforcement insulation.
Paintwork: Internally the walls are painted in 3 coats with the purchaser’s choice of colour. Spatula plastered ceiling. European ‘A’ Class quality paint is used
Yard & Garden: Brick surrounding wall around the yard. The yard is levelled up so the purchaser can soil to plant or lay crazy paving pattern, according to architectural plans.
Fencing: Painted metal banister or reinforced concrete as shown on architectural plans.
Swimming pool: Swimming pool 8m x 4m skimmer type with ceramics tiles according to architectural plans.
Parking: All residences have two covered private parking spaces and a laundry room.
- Clients are entitled to request any internal alterations with the approval of the Architects and subject to project progress.
- The following services can be offered to the clients at an extra cost.
- Interior Designer Services
- Installation of air conditioning units
- Gypsum board ceilings depending on project progress and/or height of the ceiling
- Provision or complete installation of Fire alarm system
- Electric Gate at ground floor